
Inspecting roofs for storm damage is a critical step in assessing the extent of damage caused by storms. As an expert personal shopping guide, I can tell you that it’s important to inspect your roof thoroughly and carefully after a storm to make sure that no additional damage has been done.
Contents:
A roof inspection begins with looking at the exterior of the roof for any visible signs of damage such as missing or broken shingles, cracked tiles, loose flashings or other defects. It also includes inspecting interior walls and ceilings for water stains or discoloration from water infiltration which could indicate structural damage underneath the surface. During this process all gutters should be checked for blockages due to debris buildup and leaks.
The next step is to check all penetrations on the roof like chimneys and vents for proper sealing and caulking around them which helps prevent water from entering into those areas where it can cause further deterioration over time if not taken care of properly. After that, flashing details are examined closely along eaves troughs, skylights and valleys in order to ensure they’re securely attached so they don’t come off easily during future storms resulting in leaks inside your home.
When inspecting roofs for storm damage one should look out for signs of wear & tear such as cupping shingles caused by exposure to extreme temperatures or hail impacts on asphalt shingles indicating their weakened state – both will require repairs sooner than later if left unchecked. It’s important to check slopes on different sections of the roof including flat areas since standing pools of water may form there leading up even more serious problems if not addressed promptly with proper drainage solutions installed by professionals.
Visual Inspection

Visually inspecting a roof for storm damage can be a daunting task. However, it is one of the most important steps to take when assessing the extent of any damage. While homeowners should never attempt to inspect their roofs on their own due to safety concerns, they should instead enlist the help of an experienced professional who can properly identify and assess any damages or problems with the roof’s integrity.
The first step in visually inspecting a roof for storm damage is to do so from ground level by looking for signs such as missing shingles, dents in metal flashing or gutters, broken branches scattered around the property, etc. If these signs are present then it may indicate that further investigation needs to occur from atop the structure itself.
Once safely atop the roof, it’s important to look at all areas including chimneys and vents as well as possible weak points such as valleys and edges where storms often cause significant damage. It’s also helpful during this stage of inspection if professionals use binoculars in order to check out more remote sections of a home’s rooftop which cannot easily be reached without putting themselves at risk.
Measuring Wind Speed

Measuring wind speed is an important part of assessing the extent of storm damage to a roof. To accurately measure wind speed, you will need an anemometer. An anemometer measures the force exerted by air particles as they pass through it, which is then used to calculate the velocity at which those air particles are travelling. By comparing your measurements against known thresholds for various levels of damage, you can get a better idea of how severe any impact from the storm may have been on your roofing system.
For instance, if winds reached speeds in excess of 90 miles per hour during a particular storm event, that could be enough to cause structural damage such as broken tiles or displaced flashing material – even if there were no visible signs after inspection with the naked eye. On the other hand, if winds only reached speeds between 40 and 50 miles per hour during that same event, then whatever minor cosmetic damages might have occurred would likely not require repair or replacement unless they posed some kind of health risk due to water penetration into living spaces below.
In either case though, having precise measurements taken with an anemometer is essential for making sure that any necessary repairs are performed correctly and efficiently in order to protect your home from future storms and keep it safe for years to come.
Identifying Missing Shingles

When inspecting a roof for storm damage, one of the most common issues that can be encountered is missing shingles. Identifying this type of damage is relatively straightforward and requires only basic visual inspection. The first step in assessing the extent of the damage due to missing shingles should begin with an overall examination from ground level. This will give an indication as to whether any large portions of shingles are missing or if there are only scattered areas affected by storm damage.
It may be necessary to use binoculars for a more detailed assessment, particularly on larger roofs where it would otherwise be difficult to spot small patches without them. It may also help to take photographs so that these can be compared against historical images before repairs are made in order to determine which sections need replacing or repairing and what amount of work needs doing.
For those hard-to-reach spots such as valleys or ridges on pitched roofs, then either specialised equipment such as ladders or cherry pickers may need employing in order to get up close enough and identify any loose or damaged materials present there too. By taking all these measures into account when looking for signs of missing shingle material following a severe weather event, you can accurately assess how much repair work needs doing in order make your roof safe again after being hit by storms.
Assessing Structural Damage

Inspecting a roof for storm damage can be an intimidating task, especially when assessing structural damage. It is important to inspect the entire structure of the roof, including all support beams and rafters, as well as any areas that may have been exposed to water or wind. The most common signs of structural damage are warping or cracking in any part of the roof’s structure. It is important to check for corrosion and rot due to moisture buildup caused by heavy rains or snowfall.
If there are visible signs of damage on the outside of the roof, then further inspection is necessary inside the attic space. Here, it is possible to observe if there has been water infiltration and if so how much destruction has occurred within walls or other parts of your home’s infrastructure such as wiring systems or ducts. It may be necessary to take measurements between rafters and trusses in order ascertain whether they are out-of-plumb or not aligned properly which would signal major distress in your home’s framework and potential weak spots that could lead to bigger problems down the road like collapse during extreme weather conditions like hurricanes and tornadoes with winds above 120 mph.
Finally while inspecting your roof after a storm you will want to make sure that you keep safety at top priority throughout this process by wearing protective gear such as hard hats with face shields goggles gloves etc… If you feel uncomfortable inspecting from atop your house then consider hiring an expert who specializes in these types inspections who can provide accurate assessments about what needs repaired replaced fixed etc…
Checking for Leaks and Moisture

When it comes to inspecting a roof for storm damage, one of the most important steps is checking for leaks and moisture. Not only can this indicate an area of weakness in the roof that was caused by strong winds or hail, but it can also point to potential further issues such as mold growth. This step is especially critical if the building has had any type of water penetration due to heavy rains during a storm.
To check for leaks and moisture, start by looking around all sides of the roof including edges and corners where shingles may have been loosened or displaced. Look closely at any spots where there are signs of discoloration which could be indicative of water having seeped through small cracks in the surface material. Inspect any flashing around skylights or chimneys that may be allowing rainwater into crevices between surfaces.
If you suspect there is a leak present on your roof due to what you’ve seen from your inspection, use a garden hose with a spray nozzle attachment set to low pressure and direct it over suspected areas on both sides of your roof line (the underside too). Keep an eye out for drips or wet patches that appear when spraying; these will give you a good indication as to whether further repair work needs doing before additional damage occurs inside your home/building structure.
Determining Roof Age and Durability

When it comes to assessing the extent of storm damage on a roof, one of the first steps is determining the age and durability of the roof. The age can be established by looking at any visible markings from manufacturers or installers, such as date stamps or serial numbers. Any records that may have been left by contractors who previously worked on the roof can also provide clues about its age.
The type of materials used in constructing a roof will determine its durability. For example, asphalt shingles are known for their longevity while wood shakes tend to be more prone to wear over time. It’s important to inspect each component carefully and note any indications of deterioration that could affect how much damage has occurred due to recent storms.
Taking into account all relevant information related to both age and material types will help property owners make informed decisions regarding necessary repairs and replacement costs associated with storm-damaged roofs.
Examining Gutters and Downspouts

When it comes to assessing the extent of storm damage on a roof, examining gutters and downspouts is an important part of the inspection process. Gutters can be damaged from fallen tree limbs or other debris, which can cause blockages that prevent rainwater from draining properly. If left unaddressed, this issue could lead to long-term water damage in vulnerable areas like fascia boards or soffits.
Downspouts should also be inspected for any potential clogs caused by leaves and other organic material. If there are loose parts such as brackets that hold the downspout in place they should be checked for signs of rusting or wear-and-tear due to exposure over time. This will help determine whether replacement components may need to be installed before further structural damage occurs.
Once all external surfaces have been examined and any necessary repairs completed, make sure you check inside the gutter system too – use a flashlight when needed – since clogged gutters filled with standing water are more likely than not going to contain insects such as mosquitoes who thrive in stagnant environments like these.
Evaluating Insulation Quality

When evaluating a roof’s insulation quality, it is important to inspect the type of material used and whether or not it was installed correctly. Poorly installed insulation can result in significant heat loss during winter months, as well as causing moisture buildup that could lead to mold growth. If any issues are noticed, such as wet spots or missing pieces of insulation, then immediate repairs should be made.
In addition to checking for installation errors and damaged materials, homeowners should also take the time to ensure that their attic is properly ventilated. Proper ventilation helps reduce humidity levels inside the home while also helping keep temperatures more consistent year-round. This can save energy costs over time by reducing how often a homeowner needs to run their air conditioning system during summer months or use supplemental heating sources during winter months.
When inspecting a roof for storm damage it is critical to check if there has been any water intrusion into the attic space itself. In many cases this type of damage will go unnoticed until major problems occur within the home such as structural issues caused by rot or mold growth due to high levels of moisture buildup in certain areas where water may have seeped through cracks in shingles or vents on the exterior walls of your home.